OAR 735-022-0150: Titling Park Model Recreational Vehicles

(1) DMV may issue an Oregon title for a PMRV when the applicant meets all of the following requirements: (a) Submits an application for Oregon title that meets the requirements of ORS 803.050; (b) Provides the physical site address of the PMRV; (c) Meets the qualifications for issuance of an Oregon title under ORS 803.045, including but not limited to, payment of all required fees and submission of evidence of ownership as described in OAR 735-022-0000; (d) Submits a certification that the PMRV was constructed in compliance with the version of the ANSI A119.5 that was in effect at the time of manufacture by providing: (A) If the PMRV has not been issued a title or other ownership document since it was originally manufactured, a certification on the Manufacturer’s Certificate of Origin (MCO) or letter from the manufacturer; (B) If the PMRV is assembled, a letter from the builder or a completed certification on an Assembled, Reconstructed or Replica Vehicle Certification; or (C) If the PMRV has been issued a title or other ownership documents since it was originally manufactured, a completed and signed Park Model Recreational Vehicle (PMRV) Certification form (DMV 735-274) (e) Submits a completed Park Model Recreational Vehicle (PMRV) Certification form (DMV 735-274) certifying that the PMRV: (A) Is more than eight and one-half feet wide; and is either (B) Is not permanently affixed to land for use as a permanent dwelling; or (C) Is located within a mobile home park, as defined in ORS 446.003. (f) Complies with any other applicable state and federal laws, rules and regulations related to the titling of vehicles. (2) Subsection (1)(d) of this rule does not apply to a PMRV: (a) That was manufactured prior to 1982, or (b) When an Oregon title was issued by DMV for the PMRV on or after January 1, 2020, (3) Nothing in this rule limits DMV’s discretion to request or consider other information to establish the PMRV was constructed in compliance with the ANSI A119.5 standard in effect at the time of manufacture.